Edit

Share via

Set-NetNatTransitionConfiguration

Module:
NetworkTransition Module

Sets the NAT64 configuration on a computer.

Syntax

ByName (Default) 

Set-NetNatTransitionConfiguration
    [-InstanceName <String[]>]
    [-PolicyStore <PolicyStore[]>]
    [-Adapter <CimInstance>]
    [-State <State>]
    [-InboundInterface <String[]>]
    [-OutboundInterface <String[]>]
    [-PrefixMapping <String[]>]
    [-IPv4AddressPortPool <String[]>]
    [-TcpMappingTimeoutSeconds <UInt32>]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-PassThru]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

InputObject (cdxml) 

Set-NetNatTransitionConfiguration
    -InputObject <CimInstance[]>
    [-State <State>]
    [-InboundInterface <String[]>]
    [-OutboundInterface <String[]>]
    [-PrefixMapping <String[]>]
    [-IPv4AddressPortPool <String[]>]
    [-TcpMappingTimeoutSeconds <UInt32>]
    [-CimSession <CimSession[]>]
    [-ThrottleLimit <Int32>]
    [-AsJob]
    [-PassThru]
    [-WhatIf]
    [-Confirm]
    [<CommonParameters>]

Description

The Set-NetNatTransitionConfiguration cmdlet sets the NAT64 configuration on a computer.

Examples

Example 1: Set the NAT64 configuration

PS C:\>$nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\> $prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\> $portPool = "33.0.0.1,6000-10000"
PS C:\> Set-NetNatTransitionConfiguration -InstanceName "NAT64" OutboundInterface "corpnet" -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPool

This command sets the NAT64 configuration for the instance named NAT64.

Parameters

-Adapter

Specifies the network adapter on which to apply the NAT64 configuration.

Parameter properties

Type:CimInstance
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

ByName
Position:Named
Mandatory:False
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Parameter properties

Type:

CimSession[]

Default value:None
Supports wildcards:False
DontShow:False
Aliases:Session

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:cf

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-InboundInterface

Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-InputObject

Specifies the input object that is used in a pipeline command.

Parameter properties

Type:

CimInstance[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

InputObject (cdxml)
Position:Named
Mandatory:True
Value from pipeline:True
Value from pipeline by property name:False
Value from remaining arguments:False

-InstanceName

Specifies the instance of the NAT64 which is being configured.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

ByName
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-IPv4AddressPortPool

Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from the IPv6 source address to the IPv4 target address. The format is a comma-separated list of <IPv4 address,Lowport-Highport>. Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023". The port value must be between 1024 and 65535. The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-OutboundInterface

Sets the interface on which the NAT64 sends the translated IPv4 traffic.

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Parameter properties

Type:SwitchParameter
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-PolicyStore

Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If this parameter is not specified, then the cmdlet operates on both active and persistent stores.

Parameter properties

Type:

PolicyStore[]

Default value:None
Accepted values:PersistentStore, ActiveStore
Supports wildcards:False
DontShow:False
Aliases:Store

Parameter sets

ByName
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:True
Value from remaining arguments:False

-PrefixMapping

Sets the list of IPv6 address ranges to be translated by the NAT64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8".

Parameter properties

Type:

String[]

Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-State

Sets the enabled state of the NAT64 configuration.

Parameter properties

Type:State
Default value:None
Accepted values:Disabled, Enabled
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-TcpMappingTimeoutSeconds

Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.

The default value is 7200 seconds.

Parameter properties

Type:UInt32
Default value:None
Supports wildcards:False
DontShow:False
Aliases:TcpMappingTimeout

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Parameter properties

Type:Int32
Default value:None
Supports wildcards:False
DontShow:False

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Parameter properties

Type:SwitchParameter
Default value:False
Supports wildcards:False
DontShow:False
Aliases:wi

Parameter sets

(All)
Position:Named
Mandatory:False
Value from pipeline:False
Value from pipeline by property name:False
Value from remaining arguments:False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.