Reset-NetIsatapConfiguration
Resets ISATAP configuration elements contained in a GPO.
Syntax
ByName (Default)
Reset-NetIsatapConfiguration
[-IPInterface <CimInstance>]
[-PolicyStore <String>]
[-GPOSession <String>]
[-State]
[-Router]
[-ResolutionState]
[-ResolutionIntervalSeconds]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
InputObject (cdxml)
Reset-NetIsatapConfiguration
-InputObject <CimInstance[]>
[-State]
[-Router]
[-ResolutionState]
[-ResolutionIntervalSeconds]
[-PassThru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Reset-NetIsatapConfiguration cmdlet resets ISATAP configuration elements contained in a Group Policy Object (GPO) to the not configured state.
Group Policy settings have one of the following three states: not configured, enabled, or disabled.
Examples
Example 1: Reset ISATAP configuration
PS C:\>Get-NetIPInterface -InterfaceIndex 14 | Reset-NetIsatapConfiguration -Router
This command retrieves an interface with an index 14 using the Get-NetIPInterface cmdlet, and then resets the router configuration for the ISATAP configuration of the specified interface using this cmdlet.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-GPOSession
Specifies the Group Policy session that contains the ISATAP configuration to reset.
You can use this with the NetGPO cmdlets to aggregate multiple operations performed on a GPO.
You cannot use this parameter with the PolicyStore parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
Parameter properties
| Type: | CimInstance[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
InputObject (cdxml)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-IPInterface
Specifies the IP interface on which to reset the ISATAP configurations.
Parameter properties
| Type: | CimInstance |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | True |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PolicyStore
Specifies the policy store that contains the ISATAP configuration to reset. The acceptable values for this parameter are:
ActiveStore
PersistentStore
GPO
To reset the configuration of a GPO, specify the GPO name using the following format: Domain\GPOName
You cannot use this parameter with the GPOSession parameter.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
ByName
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ResolutionIntervalSeconds
Resets the resolution interval to not configured.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | ResolutionInterval |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ResolutionState
Resets the resolution state to not configured.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Router
Resets the router configuration to not configured.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-State
Resets the state of the ISATAP configuration to not configured.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
None
This cmdlet accepts no input objects.
Outputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
When the Passthru parameter is specified, this cmdlet outputs a modified Windows Management Instrumentation (WMI) object.